18 mm Twin Screw Extruder has 44 L/D barrel design. The barrel is designed as eleven pieces and resistant to high temperatures. Every zones’ heater works by its own socket.

Extruder has a compact design with cooling bath and granulator. Designed for testing with raw material as minimum as possible and works with the small capacity for pilot production. Allows the processing of valuable polymers by segmented screw and barrel design. The screw elements of the extruder can be redesigned for any different application by changing kneading, mixing and cutting elements.

CONTROL PANEL

Extruder control panel is designed for easy use. The screw and feeding’s speeds can be adjusted,  pressure and other parameters can be seen by 10' touch screen. The values in the formulas can be saved to the  memory. By the way, you can call the formulas stored in the memory by typing their number or name and get the machine ready for use. Extruder electrical panel is located at the bottom of the table.

MOVABLE BARREL FEATURE

In case of any jamming of the screw or for cleaning, the barrel can be easily separated from the screw. With the helping of a manual arm, the barrel can be separated from the screw together with the panel and the water system. This system provides convenience for the user in terms of cleaning and checking the screws without removing the barrel.