+90 352 333 17 00      info@gulnarmakina.com   Turkish
Sitemiz yenilendi...
LABORATORY TYPE BLOWN FILM

16 mm single screw extruder has variable barrel desing such as 24 L/D – 30 L/D – 35 L/D and 40 L/D. If necesarry, the extruder can be redesigned between 24 L/D and 40 L/D.  The barrel is designed as seven pieces and resistant to high temperatures that makes possible to redesign the screw and barrel configuration for the best mixing and dispersion.  

Granulator, cast film unit, blown film unit, etc. can be applied to the Extruder. Designed testing with raw material as minimum as possible. Allows the processing of valuable polymers by changing screw and barrel design. The screw elements of the extruder can be redesigned for any different application by changing kneading, mixing and cutting elements.

CONTROL PANEL

Extruder control panel is designed for easy use. The screw and feeding’s revolutions can be adjusted, head’s pressure and other parameters can be seen by 10' standard touch screen. The values in the formulas can be saved to the device memory. By the way, you can call the formulas stored in the memory by typing their number or name and get the machine ready for use. Extruder electrical panel is located at the bottom of the table.

BLOWN FILM UNIT

SPECIFICATIONS

  • Pulling roller system
  • Lining and edge waste winding
  • Height 104 cm
  • Film width max 90 mm
  • Film thickness min 20 microns

CONTROL:

  • Starting / Stopping
  • Speed control
  • Electric: with a socket from extruder main body